I took the van over to Stephan's for an oil change, general checkup and an AC recharge. I ended up giving him the foot brake pedal, as I have spares, and looking at his Truckfridge install. His is at the top of the cabinet, as he has a Propex heater (I use a standalone Mr Buddy), but he doesn't like the little drawer he has down there as it won't open without rolling back the carpet, making it seem a lot more illicit than necessary :o)
On the way home, I went via Rancho Cordova so I could pick up a sheet of 5/8" (15mm) plywood. The problem is that this is in 5'x5' sheets, rather than 4'x8', so I couldn't get it in the van. They don't have cutting facilities there, but luckily there was a contractor who lent me a circular saw out of his truck, so I left with a 2'x5' sheet and a 3'x5' sheet. I need a single piece, less than 1'x2', so bah.