Sunday, April 29, 2018

April 28th

I got up to find that the van meeting up at the Foresthill bridge had been deleted, so I asked Jason (the organiser) WTF, then rode the DRZ over to the airfield to get the hangar set up for the open day.  The plan had been for Vic to bring Tilly and the van over later, then we'd go to Foresthill.  Jason replied that his van was down, and that there wasn't much interest, so he'd called it off, so I texted Vic and said she didn't need to bring the van or Tilly.  I started cooking lunch, and people started to show up - Gwen and CJ brought grandma and the girls, and Vic showed up with Tilly, but in the Jeep - Tilly was worked up because she knew something was going on, so Vic brought her to let her we herself out.  Rick, who's bought the Flightstar, showed up and said he'd been taxying it around, and it wouldn't turn off... it looks like something unplugged one of the ground lines. Ken and I are a lot closer to getting the Magni converted - Jim's machining the throttle connection, but we've asked him to do a replacement pre-rotator lever, too, as that hits the throttle.

April 27th

Despite being windy, the weather wasn't too bad, so I went over to the airfield after work to meet Ken and Rick and fly the Flightstar to Marysville.  Rick came with me, and we pottered over there while Ken went and played in his 162.  As we were approaching, there was a guy landing on 14, but the wind was 10mph at 220, so we landed on the shorter 23 without drama.  My turn to finals turn was maybe a little aggressive, but Rick seemed to like seeing what you can do with the plane.  We tied it down (they have some weird setup there where they get your plane in and out of your hangar for you), and Ken and I took my conversion parts off, then flew back to Lincoln.  The 162 is a civilised little plane, but I'm pretty sure I'd lose interest in pottering about in it quickly.  I think it's much better suited to going places, and stuff like the autopilot helps there.

Tuesday, April 24, 2018

April 23rd

I met Rick at the airport after work, and showed him the pre-flight for the Flightstar, then took him out for a bit to fly it.  I think it's going to take him a little while to get used to flying it, as he's obviously used to something with a much higher nose, so he defaults to ending up in a climb at a low power setting.  I showed him some turns and the wallow before a stall and then went back and landed.  Right now, he's buying it, and we're talking about me delivering it on Saturday afternoon / evening after the open hangar day presentation at the EAA, and the possible Vanagon meeting I had hoped to go to.  We'll see what the weather's doing at the weekend.

April 22nd

I spend the day just pottering about.  I did go to the airport to see a guy from Marysville who wants to buy the Flightstar, and we've agreed to test fly it tomorrow evening.  I'm looking forward to being able to fly when I want to, rather than after the worst of the thermal activity :o)

Sunday, April 22, 2018

April 21st

I headed out to the airport via the bank, where I pulled out a cashier's cheque for the Magni.  At Lincoln, I gave the cheque to Ken, then watched the LRAA presentations in their annual meeting.  After that, we peered at the Magni to figure out how we're going to convert it over so I can fly it :o)  At the moment, it sounds like I'll have a foot brake, and a twist grip throttle, but that could change.  The Magni has a 1" stick, where the Flightstar has a 7/8" - the standard motorcycle stuff is 7/8", so we're going to move over to using that to make it easier to get parts and suchlike.

I tried bending the brackets for the headlight mounts for the van using a proper brake at the airport, but the first one cracked - seems that there are different grains in some aluminium, and if you go the wrong way, it can cause this sort of thing.  I'm going to try and get some more, better stuff and try again.

I took all of my easy to remove clutter out of the Flightstar, as it sounds like Ken might have already found a buyer for it.  I'll need tools to take the conversion stuff out, and I'll do that after I'm sure I don't need to demo fly it for anybody.

When I got home, I spent some time sorting out a couple of Google Groups to do the mailings for the EAA.  It'll manage subscriptions, and have a history, and hopefully stop us getting stuff labelled as spam.

Friday, April 20, 2018

April 19th

I took the day off, and we went over the the airport to throw Vic out of a perfectly good airplane.  She seemed to enjoy it, but I don't think it's something that she wants to do regularly.



When we got home, I managed to get the grass in the back garden cut, and rotated the wheels on the Jeep (for the first time in >10,000 miles - oops).

April 18th

I went over to the airport and cooked burgers and hot dogs before the meeting.  After the meeting, we ended up painting the whole hangar floor - we're looking at a few spots (like under the plane that's parked in there) on Saturday and we're done.